GAS FIRED HUMIDIFIER – GX
Looking for an alternative to electrically generated steam humidification? Concerned about using chemically treated boiler steam for direct humidification? If so, PURE’s “GX” Series (patent no. 6,705,535) Gas Fired Humidifiers are exactly what you’re looking for.
–
Available Models
The “GX” model works with standard water and uses a Tri-Probe assembly to maintain the water level. The “GXDDR” model is for use with Deionized, Demineralized or Reverse Osmosis water. It utilizes a stainless steel float-operated fill valve to maintain the water level and a stainless steel float-operated low water cut-off switch. Humidifiers can be used with either natural or propane gas.
Ease of Maintenance
The unique side entry heater assembly provides a large clean out access section without disturbing the cover or injection tube system’s steam supply piping.
Capacities
Capacity range up to 900 lbs/hr with single units. Multiple humidifiers in a Master/Drone configuration allow for an unlimited system design.
Efficient
PURE’s highly efficient heat exchanger produces combustion efficiencies up to 84%, as well as providing simplified maintenance.
Energy Savings
Operating costs are much lower for gas than for electric almost everywhere you look in the United States.
Power burner technology allows for horizontal or vertical venting to accommodate virtually any installation location.
INTAC® Microprocessor
The INTAC® microprocessor comes factory-mounted on the control panel door and provides industry leading features. Loaded with features such as a vacuum fluorescent display, time-to-clean messages, on-screen “HELP” menus, full networking and BAS communications ports.
ETL Listed
ETL certified to IAS(AGA/CGA) standard 12-94 for gas-fired humidifiers
Choose from straight injection tubes, Fast-Pac multiple injection tube assembly, or the Insty-Pac for short dissipation applications. Area humidification can be achieved using a remote-mounted Blower Pack assembly.
STANDARD GX FEATURES
- 304 stainless steel construction
- Factory-mounted control panel
- Support legs
- Factory-insulated reservoir
- Tri-Probe level controller
- Adjustable surface water flusher
- Motorized drain valve with brass body
- User adjustable automatic drain system
- Seasonal End of Use drain system
- Dual manual reset over-temperature switch (water reservoir and gas exhaust)
- INTAC® Microprocessor
- Drain tempering kit
STANDARD GXDDR FEATURES
- 304 stainless steel construction
- Factory-mounted control panel
- Support legs
- Factory-insulated reservoir
- Stainless steel float-operated fill valve
- Stainless steel overflow stand pipe
- Stainless steel manual ball valve drain
- Dual manual reset over-temperature switch (water reservoir and gas exhaust)
- INTAC® Microprocessor
- Drain tempering kit
OPTIONAL FEATURES
- NEMA 4 weather-tight control panel
- Control panel door lock
- Door interlock safety switch
- Freeze protection
- Stand-by water temperature sensing
- Blower Pack for area humidification
- Variable Air Volume control
- Outdoor air temperature sensing
- Remote INTAC® microprocessor controller
- Outdoor enclosure