PORTABLE AIR CONDITIONING

PORTABLE WATER COOLED RENTALS

Water cooled portable air conditioners are an efficient and effective way to control the climate in
any sized room. They are an excellent choice when the application does not allow for venting
ductwork, such as enclosed laboratories.

How Do Water Cooled Portable Air Conditioning Units Work?

Portable air conditioner units that are water cooled require access to an appropriate power source,
a source of water, and a drain. They will connect to any standard sink, janitor /utility sinks, or used
with any other type of waste water outlet.

There are many applications where an air cooled air conditioner cannot be used. Because air
cooled air conditioners require ventilation to discharge the heat that they generate, ducts must be
run through windows or into floated ceilings – or to other appropriate areas, such as a warehouse
or other large spaces. This makes water cooled air conditioners a viable cooling solution when
venting is not a possibility.

Features & Specs

Automatic re-start after power interruptions
Compressor off-timer to prevent short cycling
Separate direct drive fan motors
Spot-cool and room-cool thermostat settings
Refrigerant system high-pressure switch
Internally insulated with fiberglass insulation
Thermostatic control with multi-speed fan
Heavy duty twin wheel lockable casters for portability
Power cord with arc fault protection
ETL listed
Condensate jug with overflow protection
Compressor time delay
Use water-cooled units when there is no place to duct condenser air
Standard internal condensate pump
Side quick connect water hose connections
Available as cooling only or heat pump
Sleek stainless steel cabinet, internally insulated with fiberglass insulation
Condenser water regulating valve to control head pressure and conserve water
Permanent washable filters
Forward curve fan with direct drive motor
Most units are mounted on casters for portability
Rotary compressor
Coaxial copper condenser coil
Refrigerant access valves
Power cord with arc fault circuit protection
Thermostatic control with multi-speed fan
ETL listed

Model	PWC 1211	PWC 1811	PWC 2412	PWC 6032
Cooling Capacity (BTUH)	12,500	16,000	26,500	60,100
Power Supply: Volts / Phase / Hz	115/1/60	208‑230/1/60	230/3/60	208‑230/3/60
RLA (Amps)	11.6	11.6	10.4	16.5
Width	25″	25″	36″	28.25″
Depth	10.2″	10.2″	12.25″	39″
Height	31.5″	31.5″	28.75″	52.5″
Weight (lbs)	133	133	175	460
Condensate Tank Capacity (gal)	Pump Included	3.17	3.17	Pump Included